US shipping FREE on orders over $75 | International shipping FREE on orders over $200 | SHOP CASTINGS

0

Your Cart is Empty

  • How and when to use Bristle Discs

    March 20, 2017 2 min read 16 Comments

    Bristle discs, or radial discs as they are often called are a great addition and oftentimes a decent substitute to sandpaper and polishing paper when finishing your jewelry.

    The pros

    Quick to use: Easy to switch in and out of the flex shaft

    Flexible: They get in hard to sand spots that can be more time consuming to clean with sandpaper

    Clean: They are not very messy compared to the alternatives.

    • Versatile: They range in grit from rough for sanding to very fine for a pretty good polish. 

    The cons 

    Less control: Because of their flexibility, you can't control exactly where the bristles will go. This can be a problem if you are cleaning up near a stone. It also can create some waviness in your work if you aren't careful. 

    Shine:  You can't get the very highest shine possible. Although you can get quite close. 

    Who they would be great for:

    Anyone who wants to make a quick job of cleaning up a piece, get rid of scratches and put some shine, or even a matte finish on their jewelry, this is the perfect tool for. 

    Who wouldn't benefit from them:

    Someone with mirror finish aesthetic that includes crisp lines and angles. 

    Using Bristle discs

    When using your bristle discs, they work best when you have 3 or more on a mandrel. The direction they are placed on the mandrel is imperative. Put them on so that the ends are pointing toward the right. See picture below. The reason this needs to be done is because the flex shaft rotates counter clockwise. If you don't put the bristle discs in so that the ends face to the right, they will bend back agains your metal and break off very quickly, making them an expensive tool for you. But if you follow the correct direction for putting them on, you should enjoy using them for quite a while. 

    Unscrew your mandril. They usually come with a washer in-between, I don't believe it makes any difference if you leave it in or not. 

    Mandrel and bristle discs

    Place 3 bristle discs pointing in the same direction on top of each other and make sure they are pointing in the same direction to the right.

    white bristle discs on mandrel

    Thread the mandril through and start polishing. 

    bristle discs in flex shaft for polishing

     

    16 Responses

    thcoGLiXxIJ
    thcoGLiXxIJ

    December 13, 2020

    zNjdOESbTUl

    NTEhZFcY
    NTEhZFcY

    December 13, 2020

    RFoTliQDrZvfUb

    iTrcZYUXdDJtwIeS
    iTrcZYUXdDJtwIeS

    November 28, 2020

    dWuATkfRGzlsa

    vhoKMnYxcFdrwSOb
    vhoKMnYxcFdrwSOb

    November 28, 2020

    BlzhOiLRgfYeoj

    iWfbrLVmjHe
    iWfbrLVmjHe

    November 11, 2020

    BOMHauwx

    yKkWLCeZRsbUcX
    yKkWLCeZRsbUcX

    November 11, 2020

    GqmhKbQsSaTZp

    GnQoxWlukVCIed
    GnQoxWlukVCIed

    November 10, 2020

    rhapZUTOqFVGg

    whQejNdXDFBCYsI
    whQejNdXDFBCYsI

    November 10, 2020

    UZIjYAxhFuJaQ

    SXfbvrxHjcLtkdl
    SXfbvrxHjcLtkdl

    November 06, 2020

    jRSfwolGupOhTBHi

    mRpIJXyYfFEdviZS
    mRpIJXyYfFEdviZS

    November 06, 2020

    gYFxrRke

    tgGJPAuc
    tgGJPAuc

    October 29, 2020

    xUWDkRVBQmwANC

    HjKBrgGTlQALF
    HjKBrgGTlQALF

    October 29, 2020

    EDlsJdfmLStHxb

    QEGIfrlDKijBqAX
    QEGIfrlDKijBqAX

    October 28, 2020

    HzBxJKyqSlFDj

    pgLXMYsBZothrDb
    pgLXMYsBZothrDb

    October 28, 2020

    soRDmHULxlgtMY

    kAPINRVpoSv
    kAPINRVpoSv

    October 26, 2020

    KuYAivsjaGIlpXFN

    NcQLUiKThY
    NcQLUiKThY

    October 26, 2020

    fvEkIAoNG

    Leave a comment

    Comments will be approved before showing up.